GW Instek PSU Series Programming Manual

REMOTE CONTROL
147
Positive Transition
0→1
Negative Transition
1→0
Event Register
The PTR/NTR Register will dictate the type of
transition conditions will set the corresponding
bits in the Event Register. If the Event Register is
read, it will be cleared to 0.
Enable Register
The Enable register determines which registered
Events in the Event Register will be used to set the
OPER bit in the Status Byte Register.

GW Instek PSU Series Specifications

General

Brand	GW Instek
Model	PSU Series
Category	Power Supply
Language	English