1-6 2. Models and Peripheral Equipment
V6-MLT (multi-link 2 master cable) 3 m
Used for Multi-Link 2 connection between the V7 master station and
the V7slave station.
V6-TMP (temperature controller connection cable) 3 m
Used for connection between the V7 series and a temperature
controller or a PLC via PLC2Way.
MJ-D25 (MJ-to-D-sub conversion cable) 0.3 m under development
Used for connection between the V7 series and a PLC via PLC2Way.
V7xx-GS [xx: 08 → V708/V708i, 10 → V710/V710i, 12 → V712/V712i]
(protective sheet)
This sheet protects the operation panel surface. (5 sheets/set)
V7xx-GSN10 [xx: 08 → V708/V708i, 10 → V710/V710i,
12 → V712/V712i] (protective sheet)
This anti-glare sheet protects the operation panel surface.
(5 sheets/set)
V7-BT (battery for replacement)
Replacement lithium battery for the V7 series.
V708S-FL → V708S/V708iS
V6xxx-FL [xxx: 08C → V708C, 10T → V710T/V710iT,
10S → V710S/V710iS, 12S → V712S/V712iS]
(backlight for replacement)
Replacement backlight parts for the V7 series.
To Next Page
Loading...
