EB+ Gen3 Installation guide
6 Innovative Vehicle Solutions 2013
EB+ Gen3 Standard [2M]
Independent EBS for semi and centre axle trailers.
EB+ Gen3 2M, 2 modulators, 4 sensors, multiple
auxiliary connections, integrated stability, maximum
flexibility.
Benefits:
› Easy, logical vehicle installation
› Multi-voltage operation
› Integrated stability control
› Multiple auxiliary connections allow several devices to
be fitted
› Functions and capabilities are upgradeable by
software for longer operational life
› Connect multiple CAN devices, e.g. TPMS, Info
Centre or telematics
EB+ Gen3 Standard is a 12 / 24 V EBS with integrated roll-over control, intended for fitment to semi and centre
axle trailers using full air braking systems with air / mechanical suspension.
Specifications:
› Integrated quick release valve
› Integrated anti-compound valve
› Service brake test ports
› ECU operates 8 - 32V
› EMC / RFI approved
› Reservoir M22 ports
› Valve integrated with electronic load sensing and
roll-over control
› Delivery and suspension M16 ports
› External connections via up to 13 moulded plugs
› Plastic enclosure
› Dual reservoir connections
Part numbers:
Gen3 Standard: 823 008 xxx
To Next Page
