Chapter 2 Initial Configuration and Basic Opera-
tion
© 2013 Harmonic Inc. Harmonic All rights reserved. 34 Ellipse 3000 Release 3.0, Rev. B
Ellipse Set-Up Procedures
5. In the Ancillary Data menu select Aspect Ratio.
6. Select Auto 4:3 and press <Enter> to set the aspect ratio for the program.
7. Navigate to the root then select VBI > VBI > GeneraI.
8. Use the PID parameter to set the VBI PID to 2000 (use the alphanumeric touch-pad to on the
front panel to enter the value).
9. Press <Enter> to confirm and return to VBI menu.
10. From the VBI menu navigate VBI Lines > Line 11 > Odd.
11. Select WST625x525 and press <Enter> to set the Teletext on VBI line 11/Odd.
12. Press <ESC> twice.
Aspect Ratio
1 ƒ 4:3
2 ‚ 16:9
3 ‚ Auto 4:3
4 ‚ Auto 16:9
VBI
1 PID
0300
2 Activation
Disabled
3 VBI Lines
4 Teletext Subtitling
Odd
1 ƒ Disabled
2 ‚ Raw_data
3 ‚ WST625x525
To Next Page
Loading...
