Chapter 4 Transport Stream Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 87 Ellipse 3000 Release 3.0, Rev. B
Services Sub-Menu/Tab
4.2.3.2 BISS-E Buried ID Scrambling Mode
The BISS-E Buried ID scrambling mode sets the encoder to receive a scrambling key, decode it,
and read the decoded key. This mode does not display the decoded key, only the original key
number before decoding.
The required value is a 16-digit scrambling key number.
NOTE: The scrambling word/key values for the BISS-E Buried ID scrambling mode are not displayed. Changing/
updating these values is done as soon as the new value is saved.
Front Panel
To set the Encrypted Session Word parameter on the front panel:
❖ Navigate Root > Configuration > Transport Stream > BISS-E Buried Configuration >
Encrypted Session Word.
Web Manager
To set the Encrypted Session Word scrambling parameters for the BISS-E Buried ID Scrambling
mode in the Web Manager:
❖ Select Transport > Services > Service Name.
Encrypted Session Word
00000000-00000000
To Next Page
Loading...
