Chapter 4 Transport Stream Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 86 Ellipse 3000 Release 3.0, Rev. B
Services Sub-Menu/Tab
4.2.3.1 BISS-1 Scrambling Mode
The BISS-1 scrambling mode sets the scrambling mode with a Clear Session Word key – in other
words, the key is not encrypted. Selecting this option sets the encoder scrambling mode to BISS-1
and requests the user to enter the BISS-1 scrambling key.
NOTE: The scrambling word/key values for the BISS-1 scrambling mode are not displayed. Changing/updating
these values is done as soon as the new value is saved.
The required value is a 12-digit scrambling key.
Front Panel
To set the Clear Session Word parameter for the BISS-1 mode on the front panel:
❖ Navigate
Root > Configuration > Transport Stream > Services > Service List > [Service Name]
BISS-1 Configuration > Clear Session Word.
Web Manager
To set the Clear Session Word scrambling parameters for the BISS-1 Session Word using the Web
Manager:
❖ Select Transport > Services > Service Name.
Biss-1 Session Word
000000-000000
To Next Page
Loading...
