Harris Unity XG-100P - Programming via CPA; Editing Channel Parameters

10515-0372-4200, Rev. R
102
10. Choose Next >.
11. Windows will install the driver. Click Finish when completed.
A.3.2 Windows XP Dial-Up Connection
The following configures a dial up connection to use the Windows XP Mobile Data Peripheral’s modem.
1. Open the Control Panel (Start
SettingsControl Panel).
2. Open Network Connections.
3. Choose FileNew Connection.
4. When the wizard starts, choose Next >.
5. Choose Connect to the network at my workplace.
If this is the only data connection for this machine, choose Connect to the Internet
instead.
NOTE