10515-0372-4200, Rev. R
42
3.34 SHORTCUT MENU
The shortcut menu options vary depending on radio programming. Up to 16 options can be programmed.
1. At main display, press center button to display the shortcut menu.
2. Select an option using the keypad or use to scroll through and select the desired
option. Available options vary depending on radio programming and may include:
• START/STOP SCAN - Start or stop scan shortcut menu. START SCAN
appears if not scanning. STOP SCAN appears if scanning. START SCAN is
grayed out if the radio has declared an emergency (TX EMERGENCY).
• START/STOP MONITOR -
(P25 Conventional and Analog Conventional)
Monitor and squelch types. This is grayed out if radio is scanning. See Section
3.27 for information on monitor and squelch types.
• NUISANCE DEL – Nuisance delete. This is grayed out if not scanning or if
the radio has declared an emergency (TX EMERGENCY).
Priority 1 and priority 2 channels cannot be nuisance deleted.
• LOCK KEYPAD – Lock the keypad.
• TX PWR LOW/HIGH – Toggle transmit power low or high.
• DISPLAY SA – Displays the Situational Awareness screen.
• START ICALL – Allows you to select a unit for an Individual Call.
• CHANNEL GUARD – Allows you to select an Operator Selectable tone.
• OTAR REKEY – Initiate an Over-the-Air Rekey.
• TALKARND ON/OFF – Enable/Disable Talkaround mode.
• SEL CHAN/GRP – Select the channel/group bank. If your system has more
than 48 channels, this allows you to select a channel group with channels 49-
96, 97-144, etc. (A17- A32, B17 – B32, C17 – C32, A33 – A48, etc., is
displayed by the radio).
1-16: Channels 1-48
17-32: Channels 49-96
33-48: Channels 97-144
49-64: Channels 145-192, etc.
This option is grayed out when the Command Tactical Zone is
active. See Section 4.4.1 for more information.
• VOICEANNC ON/OFF – Turns Voice Annunciation on/off.
3.10 for more information.
• CALLER ID - Allows you to view the caller ID or alias for up to the last 10
received calls. Received calls include Group, Announcement, Phone, Patch,
SimulSelect, Agency, Fleet, and MDC. “NO ENTRY” is displayed if there are
no entries.
To Next Page
Loading...
