10515-0372-4200, Rev. R
80
5.5 PROGRAMMABLE BUTTONS AND SWITCHES
5.5.1 Programmable Buttons
The programmable buttons are programmed using RPM. A delay of 0 to 10 seconds can be defined in
RPM for the programmable buttons in R4A and later software.
You can program buttons for the following:
• Monitor Toggle – Toggles Monitor On/Off.
• Secure Clear – Toggles Encryption Mode On/Off.
• Front Backlight Toggle – Toggles front display’s backlight On/Off/Momentary.
• Top Backlight Toggle - Toggles the top display’s backlight On/Off/Momentary.
• Flashlight Mode – Press and hold to turn on the front and top display backlights. Release the button to
turn off both displays.
• Scan – Toggles Scan On/Off.
• Flip Top Display – Toggles Top Display Front/Back.
• Lock Keypad – Locks the keypad.
• Nuisance Delete – Performs a Nuisance Delete. See Section 3.28 for more information.
• Talkaround – Toggles Talkaround On/Off. See Section 3.18.
• Speaker Mute – Toggles Speaker Muted/Unmuted.
• System Up – Scrolls up through the list of available systems, stopping at the top of the list.
• System Down – Scrolls down through the list of available systems, stopping when the end of the list
is reached.
• System Up Wrap – Scrolls up through the list of available systems, wrapping to the end when the
beginning of the list is reached.
• System Down Wrap – Scrolls down through the list of available systems, wrapping to the top when
the bottom of the list is reached.
• Zone Up – Scrolls up through the list of available mixed system zones, stopping at the top of the list.
If no mixed system zones are defined, or there is only one, the user will hear a deny tone when the
button is pressed.
• Zone Down – Scrolls down through the list of available mixed system zones, stopping when the end
of the list is reached. If no mixed system zones are defined, or there is only one, the user will hear a
deny tone when the button is pressed.
• Zone Up Wrap – Scrolls up through the list of available mixed system zones, wrapping to the end
when the beginning of the list is reached. If no mixed system zones are defined, or there is only one,
the user will hear a deny tone when the button is pressed.
• Zone Down Wrap – Scrolls down through the list of available mixed system zones, wrapping to the
top when the bottom of the list is reached. If no mixed system zones are defined, or there is only one,
the user will hear a deny tone when the button is pressed.
To Next Page
Loading...
