Harris Unity XG-100P - Advanced XG-100 P Operations and Features

10515-0372-4200, Rev. R
45
9. Select USB from the drop-down and click Next.
10. Select the Unity radio from the drop-down and click Load.
11. Click Finish.
4.1.2.3 Load Keys using Motorola KVL Device
Type 3 Digital Encryption Standard Output Feedback (DES-OFB) and Advanced Encryption Standard,
256-bit (AES-256), encryption methods are supported. The Type 3 Encryption keys are loaded via a
Motorola KVL device using Telecommunications Industry Association (TIA)/Project 25 (P25) key fill
device protocol. Make sure that valid keys have been created and stored in the KVL device before
proceeding.
1. Power on KVL Device.
2. Connect KVL Device to side connector using a 12082-0400-A1 cable.
Once the Device is connected, a keyset is established whether the keys are
loaded or not. You will need to zeroize to bring the XG-100P to a fully zeroized
state (Section 4.1.3).
3. The key fill in progress screen will be displayed and the radio can accept
keys from the KVL Device.
4. Remove the KVL Device cable from the radio.
4.1.3 Zeroize All from Radio
It may be necessary to remove keys because of compromise or expiration.
1. At main display, press to access the main menu.
2. Use to highlight and select SECURITY, or press .