Harris Unity XG-100P - 3.29 VIEW GPS INFORMATION

10515-0372-4200, Rev. R
38
6. Use to highlight the channel.
7. Use to select OPTIONS.
8. Use to highlight and select NUISANCE.
The icon appears next to the channel and it will not be scanned.
9. Use to highlight and select ADD BACK to add channel back to scan list. If
you do not add the channel back to the list, the channel will return to the scan list
when you cycle radio power or activate a mission plan.
10. Use to select BACK and exit the channel list.
11. Use to select BACK and exit the scan list display.
3.29 VIEW GPS INFORMATION
You can use the internal Global Positioning System (GPS) receiver to view your position and satellite
information. Remember, GPS requires an unobstructed view of the sky and the signal is greatly
diminished inside buildings, tunnels, heavily forested areas, etc. GPS may not work at all under some
conditions, especially in metal enclosures or buildings.
1. At main display, press to select MENU.
2. Use to highlight and select GPS, or press .