Harris Unity XG-100P - 4.6.3 GPS Settings; 4.6.4 Bluetooth

To Next Page

To Previous Page

10515-0372-4200, Rev. R

4.6.3 GPS Settings

GPS SETTINGS only appears if enabled in RPM and the feature is installed.

1. Enter Settings Menu.

2. Use to highlight and select GPS SETTINGS.

3. Use to change settings as desired:

• GPS - Enable or disable internal GPS.

• LINEAR UNITS -

Set unit of measurement of displayed linear units:

STATUTE, METRIC, or NAUTICAL.

• ANGULAR UNITS -

Set unit of measurement of displayed angular units:

CARDINAL, DEGREES, or MILS.

• POSITION FORMAT- Set format of displayed p

osition information:

Latitude/Longitude Degrees Minutes Seconds (LAT/LONG DMS),

LAT/LONG DM, Military Grid Reference System (MGRS),

or Universal

Transverse Mercator (UTM).

4. Use to exit the menu.

4.6.4 Bluetooth

BLUETOOTH SETTINGS

only appears if enabled in RPM and the feature is

installed.

1. Enter Settings Menu.

2. Use to highlight and select BLUETOOTH.

NOTE

Other manuals for Harris Unity XG-100P