10515-0372-4200, Rev. R
35
1. At main display, press to select MENU.
2. Use to highlight and select SCAN, or press .
3. Use to highlight and select START SCAN. The green START SCAN text
changes to red STOP SCAN.
4. Use to select BACK and exit scan menu.
Or
If programmed for start/stop scan, use :
If is programmed for start/stop scan, the other methods of starting and stopping
scan are disabled.
See Table 3-1 for the various options that can be programmed to the switch.
3.26 STOP SCAN
Perform the following to stop an active scan.
Refer to Section 3.34 to stop scan from the shortcut menu.
1. At main display, press to select MENU.
To Next Page
Loading...
