EasyManua.ls Logo

Harris Unity XG-100P - 3.14 TRANSMIT ENABLE;DISABLE; 3.15 USER INTERFACE PRIVILEGE LEVEL

Harris Unity XG-100P
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10515-0372-4200, Rev. R
25
3.14 TRANSMIT ENABLE/DISABLE
When transmit is disabled, all forms of transmission from the radio are disabled, including Bluetooth.
This is designed for use in explosive atmospheres.
If enabled via programming, use to enable or disable transmit:
Ø Transmit Disabled
O Transmit Enabled
See Table 3-1 for the various options that can be programmed to the switch.
3.15 USER INTERFACE PRIVILEGE LEVEL
Depending on radio programming, some of the menu options described in this manual may not be
available. The following table details the menus available for the different levels of User Interface
Privilege:
Figure 3-8: User Interface Privilege
FULL
ACCESS
LIMITED
ACCESS
RESTRICTED
ACCESS
Audio Settings
GPS Settings
Clock Settings
Battery Setting
Bluetooth Settings
View Scan List
Edit Scan List
Zeroize
Keyset Changeover
Global Encryption
Global Key
Program Menu only in Active Mission Plan
Self-test on Utility Menu
TCXO Tuning on Utility Menu
P25 Test Selection on Utility Menu
Command Tactical Zone
NOTE

Table of Contents

Other manuals for Harris Unity XG-100P