10515-0372-4200, Rev. R
64
4. Use to highlight channel/group.
5. Use to select OPTIONS.
6. Use to highlight and select SET PRI1 or SET PRI2.
appears with a P1 and Priority 2 channel appears with a P2.
Select REMOVE PRI to remove priority.
7. Use to exit channel/group list.
8. Use to exit scan list.
4.7.6 Custom Scan Lists
The Mixed Zone Scan (MZS) feature gives the user the capability to scan based on a custom scan list that
is assigned at the system level. The Custom Scan (CS) list can contain System and Channel/Group
configurations across P25 Trunk, P25 Conventional, and Analog Systems. When a Custom Scan List is
defined on a P25T system, the radio can scan P25T, P25C and Analog systems. When defined on a P25C
or Analog system, the radio only scans conventional channels. MZS also gives the user the capability to
scan beyond the selected system group set.
• P25T Scan
When a custom scan list is assigned to a P25T system, the user has the ability to scan P25T, P25C,
and Analog groups/channels. All P25T systems must have the same WACN, System ID, and Unit ID
to be added to the custom scan list.
• P25C and Analog Scan
When a custom scan lists is assigned to a P25C or Analog System, the user has the ability to scan
P25C and Analog channels. P25T systems are ignored.
Custom scan list can be created in RPM or on the fly at the radio. To create custom scan lists at the radio,
the appropriate backward compatibility selections must be made in RPM (refer to RPM’s online help for
more information).
• XG-100P radios with Unity R3 and earlier software do not support custom scan lists.
• XG-100P radios with XGP
R4 software support custom scan lists for P25
Conventional and Analog Conventional only.
• XG-100P with XGP
R5A software and later support custom scan lists for P25
Trunked, P25 Conventional, and Analog Conventional.
To Next Page
Loading...
