10515-0372-4200, Rev. R
67
4.8 MESSAGE MENU
4.8.1 Radio Status
The status feature is used to send a particular status condition to the site without making a voice call.
There can be up to 10 status conditions programmed into the radio. For each status defined, there is an ID
and an alphanumeric name. The ID is sent to the site and the alphanumeric name appears on the radio
display when the ID corresponds with the information programmed at the site.
1. At main display, press to select MENU.
2. Use to highlight and select MESSAGE, or press .
3. Use to highlight and select RADIO STATUS.
4. Use to highlight and select desired message. The icon changes to an arrow
to indicate active status after the status has been sent and is acknowledged by the
site.
4.8.2 Radio Message
The message feature is used to send a particular message to the site without making a voice call. There
can be up to 10 messages programmed into the radio. For each message defined, there is an ID and an
alphanumeric name. The ID is sent to the site and the alphanumeric name appears on the radio display
when the ID corresponds with the information programmed at the site.
1. At main display, press to select MENU.
2. Use to highlight and select MESSAGE, or press .
To Next Page
Loading...
