Harris Unity XG-100P - 3.16 SELECT ZONE;SYSTEM USING MENUS; 3.17 CHANNEL GUARD (ANALOG CONVENTIONAL ONLY)

10515-0372-4200, Rev. R
26
3.16 SELECT ZONE/SYSTEM USING MENUS
A zone/system is a group of channels that can be programmed by agency or geographical region. For
example, a system could be for fire, police, New York, Los Angeles, etc.
1. At main display, press to select MENU.
2. Use to highlight and select ZONE, or press .
A mission plan can have up to 512 systems, independent of banks or channels.
3. Use to view zone/system. indicates the active zone/system.
4. Use to highlight and select zone/system.
If VIEW ZONE is selected, a screen appears allowing you to view the channels
in the zone/system.
5. Use to scroll through the zones/systems.
6. Use to select highlighted zone/system.
New zone/system appears.
3.17 CHANNEL GUARD (ANALOG CONVENTIONAL ONLY)
Channel Guard is Harris’s trademark for CTCSS (tone squelch) and CDCSS (digital tone squelch).
The Channel Guard menu is only accessible if the System is setup for CG SEL in the
radio’s personality.
To select the Channel Guard tone:
1. At main display, use to select MENU.
2. Use to highlight and select CALL, or press .
NOTE