EasyManua.ls Logo

Harris Unity XG-100P - 4.6.5 Clock Settings; 4.6.6 Battery Settings

Harris Unity XG-100P
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10515-0372-4200, Rev. R
60
18. Enter name for device.
19. Use to select OK.
20. Use to exit menu.
4.6.5 Clock Settings
1. Enter Settings Menu.
2. Use to highlight and select CLOCK SETTINGS.
3. Use to change settings as desired:
DISPLAY TIME - Set 12 or 24 hour time display format.
TIME ZONE - Set time zone relative to Universal Time Coordinated (UTC).
4. Use to exit menu.
4.6.6 Battery Settings
1. Enter Settings Menu (see Section 4.6).
2. Use to highlight and select BATTERY SETTINGS.
Use only Harris approved batteries. Injury could occur from using
incorrect battery.
3. Use to select the appropriate battery:
LITHIUM ION - For accurate battery indication on front and top displays, if
battery attached to rear of radio is a Lithium-ION (Li-ION) type.
NIMH - For accurate indication on front and top displays, if battery attached to
rear of radio is a Nickel Metal Hydride (Ni-MH) type.
ALKALINE - For accurate battery indication on front and top displays, if
WARNING

Table of Contents

Other manuals for Harris Unity XG-100P