Harris Unity XG-100P - Page 59

10515-0372-4200, Rev. R
59
For Bluetooth 2.0 devices, a pin code screen appears.
10. Enter pin code.
11. Use to select OK.
For Bluetooth 2.1 devices, an accept/deny screen appears.
12. Use to select ACCEPT.
NOTE: You will also need to accept the passkey on the Bluetooth 2.1 device as well.
A message appears when pairing is complete.
13. Use to select OK.
Paired device is then displayed under pair devices list.
14. Use to select OPTIONS.
NOTE: Names containing extended ASCII characters may not display correctly.
15. Use to highlight and select choices.
If INFO was selected, the paired device information screen appears.
16. Use to exit menu.
17. Use to highlight and select FRIENDLY NAME. This is the Bluetooth name
assigned to the radio. The friendly name configured in RPM
will overwrite this
setting.