EasyManua.ls Logo

Harris Unity XG-100P - 4.6.2 Display Settings

Harris Unity XG-100P
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10515-0372-4200, Rev. R
56
TONE DESCRIPTION SOUND/DURATION
Emergency Call Received Radio is receiving an emergency call or priority call.
600 Hz tone for 250 ms and
1800 Hz tone for 250 ms
Out of Range Radio fails to find a local control channel.
Programmable via RPM:
Disabled (no tone)
Slow (tone every 15s)
Medium (tone every 10s)
Fast (tone every 5s)
4.6.2 Display Settings
1. Enter Settings Menu.
2. Use to highlight and select DISPLAY SETTINGS.
3. Use to change settings as desired:
FRONT BACKLIGHT - Turn front display backlight on, off, or momentary.
FRONT BRIGHTNESS - Set brightness level of front display. A
level of 0
has same effect as turning off backlight.
FRONT TIMEOUT - Specify how long the radio needs to be inactive before
the front display’s backlight turns off.
TOP BACKLIGHT -
Specify how long the top display’s backlight will
remain lit: MOMENTARY, ON, or OFF.
TOP BRIGHTNESS - Set the brightness level of the top display. A level of 0
turns off top display and indicator (TX/RX) LED.
TOP TIMEOUT - Specify how long the radio needs to be inactive before the
top display’s backlight turns off.
TOP ORIENTATION -
Set orientation of top display to be viewed from
radio: FRONT, BACK, or AUTO.
When AUTO is selected, the XG-100P changes top display to be viewed from
back if an external microphone or speaker is attached. Otherwise, the display
can be viewed from the front.
4. Use to exit the menu.

Table of Contents

Other manuals for Harris Unity XG-100P