Harris Unity XG-100P - 4.10 PPP;SLIP

10515-0372-4200, Rev. R
74
22. Enter the password.
This function is for maintenance personnel only. Improper adjustment will result in
loss of communications. See Maintenance manual 14221-1100-
5000 for proper
usage.
23. Use to exit screen.
24. Use to exit main screen.
25. If a P25 channel is selected, use to highlight and select TESTS. Enter the
password to access the P25 te
sts. This function is for maintenance personnel
only.
26. Use to exit screen.
27. Use to exit main screen.
28. Use to highlight and select RSSI.
29. Enable or Disable DISPLAY RSSI
. When enabled, RSSI is displayed on the
RSSI screen and in the bottom right corner of the main display. -130 dBm is
displayed when there is no received signal.
4.10 PPP/SLIP
The XG-100P can be configured to act as a Mobile Data Terminal (MDT). An MDT is essentially a
portable computer capable of transmitting data messages via an RF communications link. Refer to
Appendix A for instructions on how to setup PPP and SLIP connections between the radio and a Mobile
Data Peripheral (MDP).