Harris Unity XG-100P - 4.7.7 Wide Area System Scan (P25 Trunked Only)

10515-0372-4200, Rev. R
66
8. Select the desired system from the list and select OPTIONS

SET CUSTOM
LIST.
9. Highlight the custom scan list and press the select button or select OPTIONS

SELECT LIST.
When a custom scan list is assigned to a system, that list is
scanned any time scanning is enabled. If the selected system is P25 Conventional
or Analog Conventional, only the conventional channels in the scan list are
scanned.
10. To scan only the channels assigned to a particular system, select USE SYSTEM
LIST from the CHOOSE SCAN LIST menu.
4.7.7 Wide Area System Scan (P25 Trunked Only)
Wide Area System Scan (WASCAN) causes the radio to roam across mobile systems when the currently
selected system's control channel is lost. The radio will scan the control channels of other systems.
1. At main display, press to select MENU.
2. Use to highlight and select SCAN, or press .
3. Use to highlight and enable SITE ROAMING.
4. Use to select BACK and exit the scan menu.