Harris Unity XG-100P - 4.4.2 Mixed System Zone

10515-0372-4200, Rev. R
52
5. From the View/Edit menu, press left or right using
to scroll through existing
systems. Press up or down using
to highlight desired channel/group. Select
ADD CH/GRP or DEL CH/GRP or
press the select button when the
channel/group is highlighted.
6. After adding all desired channels/groups, activate the Command Tactical Zone by
selecting OPTIONS

SET ACTIVE
or pressing the select button when the
Command Tactical Zone is highlighted on the Zone menu.
7.
After a creating a Command Tactical Zone, select EDIT ZONE to edit what is in
the Command Tactical Zone, view details about the channel/group, and delete any
channel/group.
8. Select DETAILS to view the system, channel or talkgroup name, and the knob
position.
9. Select OPTIONS

CLEAR ZONE from the Zone menu
to clear all
channels/groups from the Command Tactical Zone.
4.4.2 Mixed System Zone
Mixed System Zones are defined in RPM and cannot be edited on the radio. If a Mixed System Zone is
not configured in RPM, it will not appear on the radio. Up to 50 Mixed System Zones can be defined.
You can view details about each channel/group. A user programmable button can be defined to scroll
through just the mixed system zones.
1. At main display, press to access the main menu.
2. Use to highlight and select ZONE, or press .