10515-0372-4200, Rev. R
9
2. INTRODUCTION
2.1 DESCRIPTION
Your XG-100P provides full-spectrum multiband coverage:
• 136 to 174 MHz, VHF, 1 watt, 2 watts, 3 watts, 6 watts output
• 380 to 520 MHz, UHF-Low, UHF-High, 1 watt, 2 watts, 3 watts, 5 watts output
• 762 to 870 MHz, 700/800 bands, 0.5 watt, 1 watt, 2 watts, 3 watts output
The XG-100P includes the following capabilities:
Project 25 (P25) Conventional P25 Trunking
Analog FM Advanced Encryption Standard, 256-bit (AES-256)
Digital Encryption Standard Output Feedback
(DES-OFB) Encryption
Digital Encryption Standard Cipher Feedback
(DES-CFB) Encryption
Vote Scan Global Positioning System (GPS)
Bluetooth
®
Over The Air Rekey (OTAR)
Preemptive Priority Scanning Global Common Key References (CKR)
Smart Battery status and reporting P25 Conventional Situational Awareness
Command Tactical Zone External Data (PPP/SLIP)
Conventional Operator Selectable Tones P25 Trunked/Conventional Scan
TX Disable P25 Conventional Emergency Alarm
P25Trunked/Conventional Stealth Emergency P25 Trunked Radio TextLink
P25 Trunked Status/Message P25 Trunked Telephone Interconnect
P25 Trunked Call Alert Minimum Volume
Programmable Shortcut Menu Custom Scan Lists
Keypad Tones Power Up PIN Entry
Two-Button Emergency Clear OTAP (Profile) - P25T Only
Mission Plan Cloning via Bluetooth Multiple Mixed Systems/Zones
MDC-1200 Receive Support KVL-4000 Support
Bluetooth Speaker/Mic Support Enhanced Backlight Options
Enhanced Programmable Button Options
Additional Programmable Options for Two Position
Switch
Feature Management Voice Annunciation
For optional accessories, refer to 6.3. Additional accessories may have been added since publication of
this manual; contact Harris for more information.
Refer to
the Software Release Notes to determine the minimum software versions
required for features.
To Next Page
Loading...
