10515-0372-4200, Rev. R
30
3.20 INDIVIDUAL CALLS
An individual call is used to make a call to one radio as opposed to a group of radios. An individual call
can only be made on a digital channel.
Refer to Section 3.34 to initiate an individual call from the shortcut menu.
3.20.1 Transmit an Individual Call
1. At main display, press to select MENU.
2. Use to highlight and select CALL, or press .
3. Use to highlight and select INDIVIDUAL CALL.
4. Use to highlight and select the unit to call or select KEYPAD ENTRY to
enter the Unit ID.
5. Press PTT to make the call.
6. To end call, use to select END CALL.
The amount of time the radio remains in
Individual Call mode with no activity is
programmable via RPM.
To Next Page
Loading...
