EasyManua.ls Logo

Harris Unity XG-100P - 4.3 SITUATIONAL AWARENESS (SA) - P25 CONVENTIONAL ONLY

Harris Unity XG-100P
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10515-0372-4200, Rev. R
50
4.3 SITUATIONAL AWARENESS (SA) P25 CONVENTIONAL ONLY
Situational Awareness is a feature in which the XG-100P receives SA position from other units
configured to send the SA packets. The SA display shows the positions of the other radios (units) relative
to the XG-100P. To make use of SA, all radios need to have a uniquely programmed Unit ID. SA
information can also be sent to an external application via a PPP or SLIP connection using port 18088.
1. At main display, press to access the main menu.
2. Use to highlight and select GPS or press .
3. Use to select NEXT.
4. Use to select NEXT again.
5. Press left and right to view location of each unit.
If the selected
unit is red, it is in emergency; otherwise, the selected unit is displayed
in green.
6. GPS status is as follows:
Green Tracking
Orange Last known position
Red Searching
7. Press up and down to zoom the display distance of current unit.

Table of Contents

Other manuals for Harris Unity XG-100P