10515-0372-4200, Rev. R
49
4.2 ACTIVATE/VIEW MISSION PLAN
Mission plans contain radio programming information such as frequencies, channels, stations, and talk
groups. Up to 10 different mission plans can be stored in the radio, but only one can be activated at a
time.
1. At main display, press to access the main menu.
2. Use to highlight and select PROGRAM, or press .
3. Use to highlight and select mission plan. indicates the active mission plan.
4. Use to select OPTIONS.
5. Use to highlight and select:
• ACTIVATE PLAN - to activate the highlighted plan. If the plan has a power-
up PIN, you are prompted to enter the PIN before activation continues.
• VIEW PLAN INFO - to view mission plan information.
If plan is activated, radio displays series of screens indicating status, ending with a
PLAN COMPLETE followed by name of plan.
6. Use to select OK.
You cannot activate a plan when the radio is transmitting an emergency.
A MISSION PLAN FAILED
message may be displayed for errors such as invalid
syntax in the fill or some other invalid parameter.
7. If a plan is
being viewed, radio displays the plan’s filename. Plan information
appears if field was filled out in RPM.
8. Use to select BACK.
9. Select Home Key or repeatedly use to exit menus.
To Next Page
Loading...
