10515-0372-4200, Rev. R
31
3.20.2 Receiving an Individual Call
1. When receiving an Individual Call, the radio displays the calling radio’s name or
Unit ID.
If the radio is programmed for Acknowledged Individual Call, the radio
displays “ICALL REQUESTED,” then displays the Unit ID.
2. Press the PTT button to respond. The amount of time the radio will remain in the
Individual Call mode with no activity is programmable via RPM.
3. The radio rings and indicates a missed call
if you do not respond to an incoming
Individual Call. The ring sounds continuously until you press PTT, select the CLR
MISSED softkey, change channel/group/system, or power cycle the radio.
4. Select END CALL to end the individual call in progress.
5.
If your system is configured for Acknowledged Individual Call, you have the
option to REJECT CALL using .
3.21 GROUP CALLS
3.21.1 Change Talkgroup
A talkgroup is a group of radios that you want to have private conversations with. These groups can be
divided into areas such as state, region, county, or large special events. A group call can only be made on
digital channels.
P25 Trunked
Turn the Channel/Group knob to select the desired group (see Figure 3-1).
To Next Page
Loading...
