10515-0372-4200, Rev. R
29
radio detects the second tone, it sounds the appropriate Type 99 alert tone. After the second tone stops,
the receiver audio path is opened in order for the user to receive messages.
3.19.1 Enable/Disable Type 99 from Call Menu:
1. At main display, press to select MENU.
2. Use to highlight and select CALL, or press .
3. Use to change T99 TOGGLE between ENABLED and
DISABLED. T99 is displayed in the top of the radio display when
Type 99 is enabled.
3.19.2 Disable After PTT
If this option is programmed in RPM, Type 99 is disabled after the radio user activates the PTT. This
allows the radio user to monitor traffic on the channel (after a PTT action) without pressing the monitor
button.
Can be used in conjunction with the “Auto Reset” option to disable Type 99 after a PTT and
automatically reset, or enable, Type 99 after 30 seconds.
3.19.3 Auto Reset
If this option is programmed in RPM, Type 99 is automatically reset, or turned back on, after 30 seconds.
Can be used in conjunction with the “Disable After PTT” option to disable Type 99 after a PTT and
automatically reset, or enable, Type 99 after 30 seconds.
To Next Page
Loading...
