Harris Unity XG-100P - 4.4 USER-DEFINED ZONES;SYSTEMS; 4.4.1 Command Tactical Zone

10515-0372-4200, Rev. R
51
8. Select OPTIONS. From here, select UNIT INFO
to display details
about the selected unit, select REFRESH
to update information, or
select EXIT.
4.4 USER-DEFINED ZONES/SYSTEMS
4.4.1 Command Tactical Zone
The Command Tactical Zone is defined “on-the-fly” at the radio.
A Command Tactical Zone is reset when a Mission Plan is activated.
To create a Command Tactical Zone:
1. At main display, press to access the main menu.
2. Use to highlight and select ZONE, or press .
3. Use to highlight <USER-DEFINED> and select OPTIONS.
4. Select VIEW/EDIT or select RENAME ZONE to rename the Command Tactical
Zone (up to 16 characters are allowed).
NOTE