Harris Unity XG-100P - 4.1.7 View Key List; 4.1.8 OTAR Configuration

10515-0372-4200, Rev. R
48
4.1.7 View Key List
1. At main display, press to access the main menu.
2. Use to highlight and select SECURITY, or press .
3. Use to highlight and select KEY LIST.
4. The available key lists are displayed. Select the Home Key or repeatedly press
to exit menus.
4.1.8 OTAR Configuration
OTAR is the over-the-air-rekeying from a KMF and must be enabled for the digital only channel using
RPM. For OTAR operation, the appropriate KEKs must be loaded into the radio using the Harris Key
Loader or a KVL device.
The KMF Configuration must include the RSI of the KMF and the appropriate Message Number Period.
1. At main display, press to access the main menu.
2. Use to highlight and select SECURITY, or press .
3. Use to change OTAR to ENABLED or DISABLED.
4. Use to select OTAR REKEY to request that the KMF updates the keys in the
radio.
OTAR REKEY is only enabled if the radio has successfully registered
for data operations.
5. Select Home Key or repeatedly use to exit menus.
NOTE