EasyManua.ls Logo

Harris Unity XG-100P - 4.8.3 Radio TextLink (P25 Trunked Only); 4.8.3.1 Radio TextLink Messages

Harris Unity XG-100P
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10515-0372-4200, Rev. R
68
3. Use to highlight and select RADIO MESSAGE.
4. Use to highlight and select the desired message. The icon changes to an
arrow to indicate active status after the message has been sent and is
acknowledged by the site.
4.8.3 Radio TextLink (P25 Trunked Only)
Radio TextLink provides short text messaging functionality for radios. Because of the difficulty of
entering text messages on a radio, predefined "canned" messages and predefined replies can be stored in
the radio. To facilitate sending messages where information must be provided at send time, text message
forms will also be stored in the radio. A form contains up to four (4) text prompts, for which the operator
enters alphanumeric values before sending the message.
4.8.3.1 Radio TextLink Messages
1. At main display, press to select MENU.
2. Use to highlight and select MESSAGE, or press .
3. Use to highlight and select TEXTLINK MSGS.
4. Use to highlight the desired message.

Table of Contents

Other manuals for Harris Unity XG-100P