10515-0372-4200, Rev. R
58
3. Use to set ENABLED to YES.
4. Use to select PAIRING MGMT. This is used to pair the radio with another
Bluetooth device.
5. Make sure device being paired is powered on and has discovery mode enabled in
order to pair with the XG-100P.
If no devices are found and Bluetooth is enabled, ADD NEW appears in the lower
right corner. If devices are found, OPTIONS appears.
6. Use to ADD NEW or OPTIONS.
If OPTIONS was selected, the options menu appears.
7. Use to highlight and select ADD NEW.
Device being paired should be displayed.
8. Use to REFRESH device list if device does not appear.
9. Use to highlight and select device.
Progress is then displayed.
To Next Page
Loading...
