10515-0372-4200, Rev. R
108
13. Choose OK. The previous Networking tab properties window will be accessible again.
14. Select Internet Protocol (TCP/IP).
15. Choose Properties.
16. Select Obtain an IP address automatically unless the radio will be defining its own IP address. If
this is specified, it must match the PPP/SLIP address within RPM (often defaulted to:
199.81.106.100). Check with the system administrator regarding specifying a static IP address.
17. Choose Advanced.
18. Deselect Use default gateway on remote network and deselect Use IP header compression.
or
Use Unity MDT’s
RF IP Address
To Next Page
Loading...
