10515-0372-4200, Rev. R
71
3. Use to highlight and select FAULTS/ALERTS.
4. Observe messages in display.
NOTE: The alert icon goes away when you go to the message display (unless a
new fault occurs).
5. Use to select OPTIONS.
6. Use to highlight and select DETAILS, DELETE, or DELETE ALL.
7. NOTE: If you view but do not delete the fault, the alert icon goes away.
For DETAILS:
• BATTERY FAULT
• BATTERY COMMS FAULT - replace battery.
• NON-STANDARD BATTERY - replace battery.
• EEPROM FAULT - contact Harris.
• RF FAULT
• OVERCURRENT -
Check antenna and antenna connection. Try
replacing antenna.
• ZONE FAULT – Feature not installed.
• CHANNEL FAULT – Feature not installed.
Contact Harris for assistance diagnosing a fault.
8. Use to exit back to main screen.
To Next Page
Loading...
