10515-0372-4200, Rev. R
82
Changing to a Tx Power High position overrides the current personality or user setting for TX
Power.
Changing from a Tx Power High position restores the personality-configured Tx Power Level.
• Tx Power Low – Sets transmission power level to Low.
Changing to a Tx Power Low position overrides the current personality or user setting for TX
Power.
Changing from a Tx Power Low position restores the personality-configured Tx Power Level.
• Keypad Lock – Locks numeric, #, * and navigation soft keys.
• Radio Lock - When set, prevents the radio software from responding to the following physical inputs
on the radio:
Volume Knob Change (power off is not prevented)
2-Position Switch
Channel Knob
Side User Programmable Button 1 (yellow button with 3 dots) – unless programmed for
Monitor/Clear
Side User Buttons 2 and 3 (black buttons with 2 dots or 1 dot)
Keypad (numeric keys, #, * and navigation/soft keys)
Indexed features:
These features can be assigned to any number of positions as long as each index value selected for it is
unique across multiple assignments of the same feature; for example, you can’t assign a Zone with a
particular index (e.g., “ZONE A”) to both positions A and B.
• Channel Bank – Selects channels 1-16 in position A; 17-32 in position B; and 33-48 in position C.
If Channel Bank is selected for any single position, the entire set of 3 positions (A, B, and
C) will be set to Channel Bank.
• Zone Selection – Sets to the Zone index value.
When setting the A/B/C switch to an indexed zone assigned position, the radio sets, but does not
“hold,” that zone. This has the resulting effects:
o This sets the channel knob to be zone-based system/channel selection just like selecting a
zone from the main “Zone” menu.
o If a user then changes to a different system or zone, it will override the radio’s
zone/system/channel selection accordingly and not require it to remain where the switch
assignment set it to.
When changing from a Zone assigned position, no actions/changes will be taken by the radio.
• System Selection – Sets to the System index value.
When setting the A/B/C switch to an indexed System assigned position, the radio sets, but does
not “hold,” that System. This has the resulting effects:
To Next Page
Loading...
