HIKVISION iDS-9000HQHI-M8/S Series - Vehicle Detection; Configure Vehicle Detection; Vehicle Search

5.7 Vehicle Detecon
Vehicle detecon is available for the road trac monitoring. In vehicle detecon, the passed
vehicle can be detected and the picture of its license plate can be captured.
5.7.1 Congure Vehicle Detecon
Vehicle detecon is available for road trac monitoring. In Vehicle Detecon, a passed vehicle can
be detected and the picture of its license plate can be captured.
Steps
1.
Go to System → Event → Smart Event .
2.
Select a camera to
congure.
3.
Click Vehicle.
4.
Check Enable Vehicle Detecon .
5.
Oponal: Check Save VCA Picture to save the captured vehicle detecon pictures.
6.
Set the arming schedule.Refer to Congure Arming Schedule
7.
Set the linkage acons. Refer to Congure Linkage Acons
8.
Congure rules, including Area Sengs, Picture, Overlay Content, and Blocklist and Allowlist.
Area Sengs
Up to 4 lanes are selectable.
Blocklist and Allowlist
You can export the le rst to see its format, and edit it and import it to the device.
9.
Click Apply.
Note
Refer to the Network Camera User Manual for detailed instrucons for the vehicle detecon.
5.7.2 Vehicle Search
You can search and view the matched vehicle pictures.
Steps
1.
Go to Smart Analysis → Smart Search → Vehicle Search .
2.
Select the IP camera for the vehicle search.
3.
Set search
condions.
Digital Video Recorder User Manual
78