HIKVISION iDS-9000HQHI-M8/S Series - Configure Exceptions Alarms

5.
Check Input.
6.
Set the arming schedule. Refer to Congure Arming Schedule .
7.
Set linkage acons. Refer to Congure Linkage Acons .
6.1.4 Congure Excepons Alarms
Excepon events can be congured to take the event hint in the Live View window and trigger
alarm output and linkage acons.
Steps
1.
Go to System → Event → Normal Event → Excepon .
2.
Oponal: Enable the event hint to display it in the live view window.
1) Check Enable Event Hint.
2) Click
to select the excepon type(s) to take the event hint.
Figure 6-1 Event Hint Sengs
3.
Select an excepon type.
Figure 6-2 Excepons Handling
Digital Video Recorder User Manual
83