HIKVISION iDS-9000HQHI-M8/S Series - NTP Synchronization; DST Synchronization

Steps
1.
Go to System → General .
2.
Congure the date and me.
3.
Click Apply to save the sengs.
12.2.2 NTP Synchronizaon
Connecon to a network me protocol (NTP) server can be congured on your device to ensure
the system’s date and me accuracy.
Steps
1.
Go to System → Network → TCP/IP → NTP .
2.
Check Enable.
3.
Congure NTP sengs as need.
Interval (min)
Time interval between two me synchronizaon with NTP server
NTP Server
IP address of the NTP server
NTP Port
Port of the NTP server
4.
Click Apply
12.2.3 DST
Synchronizaon
DST (daylight saving me) refers to the period of the year when clocks are moved one period
ahead. In some areas worldwide, this has the eect of creang more sunlit hours in the evening
during months when the weather is the warmest.
We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning
of DST, and move them back the same period when we return to standard
me (ST).
Steps
1.
Go to System → General .
2.
Check Enable DST.
3.
Set DST mode as Auto or Manual.
Auto
Automacally enable the default DST period according to the local DST rules.
Manual
Manually set the start me and end me of the DST period, and the DST bias.
4.
Set the DST Bias. Set the
me (30/60/90/120 minutes) oset from the standard me.
5.
Click Apply to save the sengs.
Digital Video Recorder User Manual
136