HIKVISION iDS-9000HQHI-M8/S Series - Call a Patrol

Figure 3-17 Key Point Conguraon
1) Congure key point parameters.
Preset
Determines the order the PTZ will follow while cycling through the patrol.
Speed
Denes the speed the PTZ will move from one key point to the next.
Duraon
Refers to the duraon to stay at the corresponding key point.
2) Click Apply to save the key points to the patrol.
6.
Other operaon is as follows.
Table 3-1
Operaon Descripon
Operaon Descripon Operaon Descripon
Select a key point to delete. Edit the added key point.
Adjust the key point order Adjust the key point order
7.
Click Apply to save the patrol sengs.
3.6.5 Call a Patrol
Calling a patrol makes the PTZ move according to the predened patrol path.
Steps
1.
Click on the quick sengs toolbar of the PTZ camera's live view.
2.
Click Patrol on the PTZ control panel.
Digital Video Recorder User Manual
38