HIKVISION iDS-9000HQHI-M8/S Series - Sudden Scene Change Detection

Note
Sensivity range: [1-100]. The higher the value, the more easily the defocus image will be
detected.
7.
Set the arming schedule.Refer to Congure Arming Schedule .
8.
Set the linkage
acons. Refer to Congure Linkage Acons .
9.
Click Apply.
6.2.5 Sudden Scene Change Detecon
Scene change detecon detects the change of the surveillance environment aected by external
factors, such as the intenonal rotaon of the camera.
Steps
1.
Go to System → Event → Smart Event .
2.
Click Sudden Scene Change.
Figure 6-7 Sudden Scene Change
3.
Select a camera to congure.
4.
Check Enable.
5.
Oponal: Check Save VCA Picture to save the captured sudden scene change detecon pictures.
6.
Drag the
Sensivity slider to set the detecon sensivity.
Digital Video Recorder User Manual
89