HIKVISION iDS-9000HQHI-M8/S Series - Set User Permissions

11.2.1 Set User Permissions
For an added user, you can assign the dierent permissions, including local and remote operaon
of the device.
Steps
1.
Go to System → User .
2.
Select a user from the list, and then click to enter the permission sengs interface.
Figure 11-3 User Permission Sengs Interface
3.
Set the user's operang permissions for Local Conguraon, Remote Conguraon, and
Camera Conguraon for the user.
1) Set Local
Conguraon
Local Log Search
Searching and viewing logs and system informaon of device.
Digital Video Recorder User Manual
126