HIKVISION iDS-9000HQHI-M8/S Series - Call a Preset; Set a Patrol

7.
Click Apply to save the preset.
8.
Oponal: Click Cancel to cancel the locaon informaon of the preset.
9.
Oponal: Click in the lower right corner of Live View to view the congured presets.
Figure 3-12 View the Congured Presets
3.6.3 Call a Preset
A preset enables the camera to point to a specied posion such as a window when an event takes
place.
Steps
1.
Click
on the quick sengs toolbar of the PTZ camera's Live View.
2.
Click in the lower right corner of Live View to set the preset.
3.
Select the preset No. from the drop-down list.
4.
Click Call to call it, or click
in the lower right corner of Live View, and click the congured
preset to call it.
Figure 3-13 Call Preset (1)
Figure 3-14 Call Preset (2)
3.6.4 Set a Patrol
Patrols can be set to move the PTZ to key points and have it stay there for a set duraon before
moving on to the next key point. The key points are correspond to the presets.
Steps
1.
Click
on the quick sengs toolbar of the PTZ camera's live view.
2.
Click Patrol to congure patrol.
Digital Video Recorder User Manual
36