EasyManua.ls Logo

HIKVISION iDS-9000HQHI-M8/S Series - Export Network Packet; Network Resource Statistics

HIKVISION iDS-9000HQHI-M8/S Series
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.
Select a network card in Select NIC.
3.
Enter the desnaon IP address in Desnaon Address.
4.
Click Test.
Figure 12-2 Test Network Delay and Packet Loss
12.3.3 Export Network Packet
Aer the recorder accessing network, you can use USB ash drive to export network packet.
Before You Start
Prepare a USB ash drive to export network packet.
Steps
1.
Insert the USB ash drive.
2.
Go to Maintenance → Network Detecon .
3.
Select network card in Select NIC.
4.
Select the USB
ash drive in Device Name. You can click Refresh if the connected local backup
device cannot be displayed.
Figure 12-3 Export Network Packet
5.
Oponal: Click Status to view the network status.
6.
Click Export.
Note
It will export 1 MB data each me as default.
12.3.4 Network Resource Stascs
The remote access, including web browser and client soware, will consume output bandwidth.
You can view the real-me bandwidth stascs.
Steps
1.
Go to Maintenance → Network → Stat .
Digital Video Recorder User Manual
138

Table of Contents

Related product manuals