HIKVISION iDS-9000HQHI-M8/S Series - Why Is the IP Address of Network Camera Being Changed Automatically; Why Is the Video Recorder Notifying IP Conflict; Why Is Image Getting Stuck When Playing Back by Single or Multi-Channel Cameras; Why Does My Video Recorder Make a Beeping Sound after Booting

13.5.9 Why is the IP address of network camera being changed automacally?
Reason
When network camera and video recorder are using the same switch but in dierent subnets, the
video recorder will change the IP address of network camera to the same subnet as itself.
Soluon
When adding camera, click Custom Add to add camera.
13.5.10 Why is the video recorder nofying IP conict?
Reason
The video recorder uses the same IP address as other devices.
Soluon
Change the IP address of video recorder. Ensure it is not the same as other devices.
13.5.11 Why is image
geng stuck when playing back by single or mul-channel
cameras?
Reason
HDD read/write excepon.
Soluon
Export the video, and play it with other devices. If it plays normally on other device, change your
HDD, and try again.
13.5.12 Why does my video recorder make a beeping sound
aer boong?
Reason
1. The front panel is not fastened (for the device which its front panel is removable).
2. HDD error, or do not have HDD.
Digital Video Recorder User Manual
161