HIKVISION iDS-9000HQHI-M8/S Series - Enable H.265 Stream Access; Manual Recording; Configure Recording Schedule

The me you set to record before the scheduled me or event. For example, when an alarm
triggers the recording at 10:00, and if you set the pre-record me as 5 seconds, the camera
records at 9:59:55.
Post-record
The me you set to record aer the event or the scheduled me. For example, when an
alarm triggered recording ends at 11:00, and if you set the post-record me as 5 seconds, it
records
ll 11:00:05.
Stream Type
Main stream and sub-stream are selectable for recording. When you select sub-stream, you
can record for a longer
me with the same storage space.
Expired Time
The expired me is period for a recorded le to be kept in the HDD. When the deadline is
reached, the le will be deleted. If you set the expired me to 0, the le will not be deleted.
The actual keeping me for the le should be determined by the capacity of the HDD.
Redundant Record/Capture
By enabling redundant record or capture you save the record and captured picture in the
redundant HDD.
4.1.2 Enable H.265 Stream Access
The device can automacally switch to the H.265 stream of IP camera (which supports H.265 video
format) for the inial access.
Go to Camera → More
Sengs → H.265 Auto Switch Conguraon to enable the funcon.
4.1.3 Manual Recording
You can click to manually start/stop recording videos at live view.
4.1.4
Congure Recording Schedule
The camera would automacally start/stop recording according to the congured recording
schedule.
Before You Start
●
Ensure you have installed the HDDs to the device or added the network disks before storing the
video
les, pictures and log les.
●
Before enabling
Moon, Alarm, M | A (moon or alarm), M & A (moon and alarm), and Event
triggered recording and capture, you must congure the moon detecon sengs, alarm input
sengs and other events as well. Refer to VCA Event Alarm for details.
Digital Video Recorder User Manual
45