HIKVISION iDS-9000HQHI-M8/S Series - IP;MAC Address Filter

Steps
1.
Go to Maintenance → System Service → ONVIF .
2.
Check Enable ONVIF to enable the ONVIF access management.
Note
ONVIF protocol is disabled by default.
3.
Click Add.
4.
Enter User Name, and Password
Cauon
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case leers, lower case
leers, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
5.
Select Level as Media User, Operator or Admin.
6.
Click OK.
12.9.2 IP/MAC Address Filter
The address lter decides whether to allow or forbid specic IP/MAC address to get access to your
device.
Steps
1.
Go to Maintenance → System Service → Address Filter .
Figure 12-20 Address Filter
Digital Video Recorder User Manual
151