HIKVISION iDS-9000HQHI-M8/S Series - Face Picture Search

Enable Alarm Output Pulse
It is usually linked with a gate. When a person is passing a gate, if the comparison succeeded,
it will trigger a pulse to open the gate. The pulse is between 100 to 900 ms. You can set Alarm
Output Pulse (ms) in System → Event → Normal Event → Alarm Output .
6.
Select face picture libraries and set similarity.
7.
Set the arming schedule. Refer to Congure Arming Schedule .
8.
Set the linkage
acons when face picture comparison succeeded or failed. Refer to Congure
Linkage Acons .
9.
Click Apply to save the sengs.
5.3.4 Face Picture Search
Search by Face Picture Comparison Event
Search face picture by face picture comparison results.
Steps
1.
Go to Smart Analysis → Smart Search → Face Search → Search by Event .
2.
Set the start me and end me.
3.
Select a channel.
4.
Select Event Type as Face Picture Comparison.
5.
Click Start Search. The search result list displays 1 channel.
6.
Click Channel to select a channel as your desire. It will display search results for the selected
channel.
What to do next
Refer to
View Searching Result .
Search by Uploaded Picture
You can search the face pictures by uploaded picture.
Steps
1.
Go to Smart Analysis → Smart Search → Face Search → Search by Picture .
Digital Video Recorder User Manual
66