HIKVISION iDS-9000HQHI-M8/S Series - Upgrade by Web Browser; Upgrade by Hik-Connect

Steps
1.
Go to Maintenance → Upgrade .
2.
Click FTP to enter the local upgrade interface.
Figure 12-11 FTP Upgrade
3.
Enter FTP Server Address.
4.
Click Upgrade to start upgrading.
5.
Aer the upgrading is complete, reboot the device to acvate the new rmware.
12.5.3 Upgrade by Web Browser
You can upgrade the device by web browser
Aer logging in to the device via web browser, go to Conguraon → System → Maintenance →
Upgrade . Click Browse to upload the rmware, and upgrade the device.
12.5.4 Upgrade by Hik-Connect
Aer logging the device into Hik-Connect, the device would periodically check for the latest
rmware from Hik-Connect. If an upgrade rmware is available, the device will nofy you when
you log in. You can also manually check for the latest
rmware.
Before You Start
Ensure the device has successfully connected to Hik-Connect, and it requires to install at least one
read-write HDD for
rmware downloading.
Steps
1.
Go to Maintenance → Upgrade → Online Upgrade .
2.
Click Check Upgrade to manually check and download the latest rmware from Hik-Connect.
Note
The device will automacally check for the latest rmware every 24 hours. If it detects available
upgrade rmware, the device will nof y you when you log in.
3.
Oponal: You can switch on Download Latest Package Automacally to automacally download
the latest
rmware package.
Digital Video Recorder User Manual
145