HIKVISION iDS-9000HQHI-M8/S Series - Chapter 8 POS Configuration; Configure POS Connection

Chapter 8 POS Conguraon
The device can be connected to a POS machine/server, and receive a transacon message to
overlay on the image during Live View or playback, as well as trigger a POS event alarm.
Note
This funcon is only available for certain models.
8.1 Congure POS Connecon
Steps
1.
Go to System → POS .
2.
Click Add.
Figure 8-1 POS
Sengs
3.
Select a POS device from the drop-down list.
4.
Check Enable.
Note
The number of POS devices supported by each device is the half of its number of channel, e.g., 8
POS devices are supported for the DS-9616NI-I8 model.
5.
Select POS Protocol.
Note
When a new protocol is selected, reboot the device to acvate the new sengs.
Universal Protocol
Click Advanced to expand more sengs when selecng the universal protocol. You can set
the start line
idener, line break tag, and end line tag for the POS overlay characters, and
the case-sensive property of the characters. You can also oponally check the ltering
idener
and the XML protocol.
Digital Video Recorder User Manual
96